Product Dimensions: 44 x 38.4 x 20.6 cm; 8.1 kgNumber of Parts: EasyMow 260BMaterial Type: PlasticPower Source Type: BatteryManufacturer: YARD FORCEItem model number: EasyMow260B-EUASIN: B09RGNLR7BPules: 1 Lithium-ion batteries required. (included)Available on Amazon.it since: March 13, 2022Amazon Best Sellers Rank: # 227,378 in DIY (View Top 100 in DIY)Lithium-ion cells with powerful 20 V, 2.0 Ah battery, cutting width: 160 mm, cutting height: 20 mm - 55 mm (3 steps)Edge cutting function to keep the garden clean and tidyEasy to use, control via Bluetooth and app and easy to use to make it very easy to use when setting the time.For a healthier garden: with the practical mulching system, the blades of grass are mowed into mulch and spread over the lawn so that they can remain as fertilizer.Box contents: 1 robotic lawnmower, 1 charging station, 80 m / 100-piece perimeter cable. Fixing nails / 9 m power cable / 3 spare blades / 3 spare screws / 3 cable connectors / spacer ruler / instruction manual NOTE: The robotic lawnmower will cut the edge of the lawn the first time it is used for the day and then proceed to mow the entire garden area. Make sure the boundary wire is laid correctly, otherwise the robotic lawnmower will “think” that the boundary wire is completely the garden.
The grass comb at the front not only increases the efficiency of the cutting process, but also removes large stones to protect the blade from damage. This increases the life of the cutting blade. And thanks to the mulching system with 3 sharp blades, the grass cuttings can be used as a natural fertilizer. Continuously adjustable cutting height from 20 to 55 mm.
Signal selection 1. Press the "signal" button on the charging station, the display changes to S2. 2. Turn on the robotic lawnmower, place it in the charging station, and after 5 seconds, the mower automatically switches to S2. The mower rotates. If the robotic lawnmower rotates in the center of the garden, please check the following: 1. The signal between the charging station and the robotic lawnmower is identical (S1 or S2). 2. Press and hold the "3H" button and turn on the mower for 5 seconds. After a long signal, the signal switches from S2 to S1. For detailed information, see page 9 of the instruction manual. Keep still and do not mow. If the robotic lawnmower remains in the center of the garden and the wheel rotates but does not cut, please check whether there is a hole or a stone under the mower. Normally, the robotic lawnmower can overcome small obstacles, but large obstacles cannot be easily overcome. Please also check whether the grass is too thick and too tall. The robotic lawnmower is used for garden maintenance, but does not completely replace the lawnmower. The grass height must be approximately 60 mm for the robot lawnmower to perform its task. Bluetooth enabled: The Bluetooth function is automatically activated when the robot lawnmower is turned on. You can search for the robot lawnmower in the CloudHawk app and pair it according to the instructions in the app.
Comment